Best RO/DI Systems for Reef Tanks
How much RO/DI water a big reef uses, what each filter stage does, when you need a booster pump, and which systems are worth a look.
11/16/20263 min read


Disclosure: Big Tank Keeper is reader-supported. As an Amazon Associate I earn from qualifying purchases, and some links on this page are affiliate links. It costs you nothing extra.
A quick note on where this comes from: I keep big freshwater tanks, not a reef. This guide is research, not a long-term test. I read manufacturer specs, retailer buying guides and reef-forum threads, then filtered all of it through one question: what changes when the tank is 150 gallons or more?
Why a reef needs RO/DI water
Tap water can carry phosphate, nitrate, silicate, copper and chlorine or chloramine. Freshwater fish shrug most of that off. Corals and the algae balance of a reef do not. An RO/DI unit strips the water down to zero total dissolved solids (TDS) so the only things in your tank are the salt and supplements you add on purpose.
How much water a big reef uses
Every reef needs fresh RO/DI water for evaporation top-off and for mixing saltwater for water changes. On a 180 to 200 gallon system that easily adds up to dozens of gallons a week. Production ratings are listed in gallons per day (GPD), and Bulk Reef Supply's rule of thumb is a handy way to picture them:
75 GPD is roughly 3 gallons per hour.
100 GPD is roughly 4 gallons per hour.
150 GPD is roughly 6 gallons per hour.
200 GPD is roughly 8 gallons per hour.
Those numbers assume good water pressure. Below about 50 psi, production drops and more water goes down the drain. That is what a booster pump fixes.
What the stages do
Sediment filter: catches grit and protects everything after it.
Carbon block: removes chlorine. If your city uses chloramine, two carbon stages or a chloramine-rated block are worth it.
RO membrane: does the heavy lifting, removing most dissolved solids.
DI resin: polishes the last bit to 0 TDS. Color-changing resin shows you when it is spent.
Extra DI stage (6 or 7 stage): makes the resin last longer and gives you a safety margin.
Options worth a look
Aquatic Life RO Buddie. A compact, entry-level unit that is easy to hook up. It is fine for a small tank or as a starter, but on a big reef its output will feel slow, so I would size up. See the RO Buddie on Amazon
IceCap 100 GPD RO/DI. A 100 GPD system aimed at growing reef tanks, a sensible middle ground for a 150-plus gallon build. See IceCap RO/DI systems on Amazon
AquaFX Barracuda. Sold in 50 and 100 GPD versions. Choose the 100 GPD model for a big tank. See the AquaFX Barracuda on Amazon
Bulk Reef Supply RO/DI systems. BRS builds 4- to 7-stage units in 75 to 200 GPD and sells them directly, not on Amazon. They are worth comparing if you want a 150 or 200 GPD water-saver setup.
RO booster pump. If your house pressure is under 50 psi, add one. It raises production and cuts waste water. See RO booster pump kits on Amazon
Setup tips that save headaches
Add an auto shut-off float valve so a forgotten fill does not flood the garage.
Use a dual inline TDS meter, one reading after the membrane and one after the DI, so you know which stage is failing.
Change the sediment and carbon filters on schedule. A clogged prefilter quietly kills membrane life.
Store water in a food-grade container with a small pump and heater for mixing and warming saltwater.
Bottom line
For a 150-gallon-plus reef, get a 100 to 150 GPD unit with at least five stages and a dual TDS meter, and add a booster pump if your pressure is low. The RO Buddie is a fine starter, but a big reef will outgrow it fast.
Next: the complete big reef equipment list and the best reef LED lights for big tanks.
Big Tank Keeper
Home-Journal-About-Contact
© 2026 Big Tank Keeper. As an Amazon Associate, I earn from qualifying purchases. · Privacy Policy · Affiliate Disclosure · Accessibility
Big tanks. Fresh and salt.