Best Aquarium Heaters for Large Tanks (and When You Need Two)

How to heat a big tank safely: how many watts, when to split across two heaters, the heaters worth buying, and the controller that prevents a cooked tank.

11/16/20262 min read

285-gallon acrylic aquarium with colorful African cichlids, rockwork and driftwood
285-gallon acrylic aquarium with colorful African cichlids, rockwork and driftwood

Disclosure: Big Tank Keeper is reader-supported. If you buy through links on this page, I may earn a commission at no extra cost to you.

On a big tank, the heater is the piece of gear most likely to hurt everything at once. A heater stuck "on" can cook a tank overnight; one stuck "off" lets it crash in a cold snap. Size it right, consider splitting the wattage across two heaters, and put a controller in charge.

What I run

Both of my tanks run one Hygger 1000W heater each, set to 80°F. It doesn't get very cold where I live, so one heater per tank keeps up. In a colder climate, I'd split the wattage across two heaters, as described below.

Quick picks

  • Hygger 1000W Submersible Heater: double quartz, also sold in 300, 500 and 800W; Hygger rates the 1000W for 130–260 gallons. One heater with enough power for a big tank; what I run.

  • Eheim Jager 300W: thick glass, accurate to about ±0.5°F, a long track record. Use two or three on a big tank.

  • Fluval E300: digital temperature display and a built-in fish guard; up to 100 gal each.

  • Orlushy Adjustable Aquarium Heater: an inexpensive, popular adjustable heater. A good budget pick for smaller tanks, quarantine or grow-out tanks, or as a backup heater.

  • Inkbird ITC-306A controller: handles up to 1,200W of heaters, cuts power if one sticks on, and sends alerts to your phone.

How many watts?

A common rule is about 3–5 watts per gallon, more if the room is cold. For a 285, that's roughly 850–1,400 watts in total. Count the water in your sump too.

Split it up in cold rooms. Two 500W heaters beat one 1,000W heater: if one fails "on," it can't cook the tank by itself; if one fails "off," the other keeps the tank warm.

Get a controller

A heater's built-in thermostat is its weakest part. A controller like the Inkbird ITC-306A plugs between the outlet and your heaters, checks the water with two probes, and cuts power if the temperature runs high. Set each heater's own dial a degree or two above the controller's setting so the controller stays in charge.

Cichlid-proofing

  • Use a heater guard, or put heaters in the sump. Big cichlids knock glass heaters into rocks.

  • Mount heaters where water moves, like near a filter output, so heat spreads evenly.

  • Unplug heaters before water changes. A heater that runs out of water can crack when the water comes back.

Bottom line

  • Big tank, mild climate: one Hygger 1000W, like mine.

  • Big tank, cold room: two heaters adding up to 3–5 watts per gallon, run through an Inkbird controller.

  • Small, quarantine or grow-out tank: the Orlushy adjustable heater or one Eheim Jager.

Planning a big build? Grab the free Big Tank Equipment Checklist, and see everything I run on my My Gear page.